Got lucky here and the wall was not really connected to the slap. After finishing the side cuts, I was able to knock down the cutout onto the cleared area outside. Plan to roll the hull out on 1.5" PVC pipe using a variety of tackles, etc. May do a potluck deal with some friends to lend a hand, but honestly probably easier to do it nice and slow with John and Abby lending a hand.
Naturally, the screen framework did not come out completely cleanly, but was able to get it out without too much damage. Eventually all the uprights will need to come out if I proceed with the plan of assembling the two hulls inside.
Here is a pic on the outside where I cleared away the shrubs to reveal the area to be opened up. The downside of all this is how much it exposes what I'm up to.
No comments:
Post a Comment